HOOD AND TRUNK LIGHT
I mounded the front one in center of the hood
drill small hole in corner of hood by spring install rubber grommet, fished the wire down
the hood through hole then installed wire loom ran wire down to started solenoid
battery side installed wire eye lit on wire and fuse then finished
connected it to the solenoid .
|For the trunk I started at fuse
panel added fuse to new wire harness . Ran wire behind kick panel under the carpet under seat had to
remove bottom of seat . Then mounted same way as hood. I used number 94
bulbs low candle power.
You choice of bulbs.
Disclaimer: This site is not intended to instruct or teach
anyone in proper or safe methods of working on or maintaining a car and the
author takes no responsibility for the use of the information contained herein.
Any usage or adaptation of any or all of the information provided here
or on any or all of my web pages is purely at your own risk. You must
take into account your own circumstances and vehicle requirements when
attempting to utilize any or all of the information provided on any or
all of my web pages. I assume no liability or responsibility for any
results, damage, or unforeseen circumstances related in any way to the
usage or adaptation of any or all of the aforementioned information.