Does your IC-7100 suffer from Low Audio on 2 meter and 440 Analog

 

 A radio friend found the answer the main touch screen make sure the FIL1 has been chosen. FIL1 , FIL2, and FIL3 work also in Transmit mode . I called ICOM AMERICAN  I-800-253-1493 and sure enough it is true. In the manual , I did find this on page 5-6 of the Advance Manual.

 

 So it looks like FIL1 is WIDE

                          FIL2 is Medium

                          FIL3 is Narrow

 

A very good Article was written by Adam Farson can be seen at     http://www.ab4oj.com/

 

 

back.gif - (25K)