Loss of Power

There could be several things but the most times is the fuses or holder or both.

  • Even though a fuse "looks good" and may even test good with an ohmmeter, there can still be an intermittent connection INSIDE the fuse (or the fuse holder).

  • Remove the fuse and sand the contact area if you don't have a ohm meter replace the fuse, never run the rig with out the fuses installed.

    Your fuse holder might look different pull the fuses out ,look at the pin for carbon tracks or what looks likes a black mark on the fuses.

     

    back.gif - (25K)