Microphone Audio IC-7100

 Microphone  Audio can be confusing before you try any of these setting you need a pair of Head Phones to do following setup.

 The control unit in the back are two jacks behind the big tuning knob,  in the back labeled  phone/ speaker this is the one you'll be using check picture

Download the Icom IC-7100 Advance Manual  go to page 116.

(note) when you have the advance manual loaded to find something in the manual hold the control key and the "F" key now look on lower left corner of your screen type a word in there and see what happens 

With you heads phones plug in and all other radio off your  ready to adjust the audio. You find that  there is audio setting for the different modes we are only interested in the transmitted audio, for SSB, AM, FM, AND DSTAR.

THIS WILL WORK IN CONJUNCTIONS  WITH MIC/POWER BUTTON FROM CONTROL HEAD BUTTONS.

 1. TOUCH SET BUTTON

 2. GO UP AND DOWN MENU  SELECT FUNCTION

 3.AT TOP OF THE SCREEN TOUCH MONITOR SO IT READS ON

 4.TALK INTO THE MIC AND ADJUST MONITOR LEVEL  MINE IS

    SET TO 24%

 5. TOUCH RETURN KEY BOTTOM OF SCREEN

 6. TOUCH TONE CONTROL

 7. TOUCH TX

 8. PICK BAND

 9. IF IN SSB ADJ TRW NAR  MINE IS SET 500-2800

10. TOUCH RETURN KEY

11. CHOSE FM MODE TOUCH SCREEN

12. YOU HAVE A CHOICE OF BASS OR TREBLE , I HAVE MINE SET TO +4   BASS AND TREBLE ST TO +3 YOUR SETTING WILL PROBABLY BE DIFFERENT.

 13. WHEN DONE TOUCH RETURN ENJOY

 14. Added on OCT. 16, 2014 Main touch screen use FIL1 this FM wide Setting, this info can be found in the Advance Manual chapter 5 page 6.

  73 JIM W4WWJ

back.gif - (25K)